What is the difference between a baluster, a picket, and a spindle?

The terms are often used interchangeably, but there are subtle distinctions. A baluster is a vertical support member in a railing system, connecting the top rail to the bottom rail or floor surface. A picket is typically a flat or square bar version, commonly used in fence panels. Spindle is a general term, usually referring to turned or shaped vertical members. In ornamental iron work, all three styles serve the same structural and decorative purpose.

What building code governs baluster spacing?

The International Residential Code (IRC) requires that gaps between balusters must not allow a 4-inch sphere to pass through. On stair railings, because of the angle, the maximum opening is 4-3/8 inches. A practical rule of thumb is to place approximately three balusters per linear foot of railing to comfortably meet this requirement. Always confirm with your local building department, as some jurisdictions adopt amendments to the model code.

Can I use ornamental steel balusters for outdoor applications?

Solid steel balusters are well suited for both interior and exterior installations. For outdoor use, a quality powder coat finish is essential to protect against moisture and rust. Hollow balusters can be used outdoors when they are welded to metal top and bottom rails, which seals the interior from moisture accumulation. If hollow balusters will be used outdoors with non-welded connections, moisture can enter the tube and cause rust from the inside out — solid balusters are the safer choice in that scenario.

What is the difference between solid and hollow steel balusters?

Solid balusters are forged from mild steel and offer a slightly textured, old-world surface. They are more intricate in the designs they can hold, perform better outdoors, and have no flex. Hollow balusters are fabricated from higher-grade steel tubing, have a smooth surface, and are lighter — making them easier to cut, handle, and ship. Both meet building code strength requirements. Hollow balusters have become the industry standard for production work due to cost and ease of installation; solid is preferred for exterior, high-detail, or restoration projects.

Do balusters come in standard lengths, and can they be cut to size?

Yes. Ornamental iron balusters are sold in standard lengths and are designed to be cut down on the job site to match your specific rail height. Hollow balusters can be cut with a hacksaw or angle grinder with a metal cutting wheel. Solid balusters require a chop saw with a metal-cutting blade. Always cut from the bottom of the baluster to preserve the decorative top detail.

Does Superior Ornamental Supply offer wholesale pricing for contractors?

Yes. Superior Ornamental Supply serves both retail customers and wholesale trade accounts including ironworkers, welders, fence contractors, and fabricators. Contact us at (888) 525-1280 or info@superiorornamentalsupply.com for volume pricing information.

What gives hammered balusters their distinctive texture?

The hammered texture is created by mechanically striking or pressing the bar surface to produce a series of small, faceted indentations that catch light differently at different angles. It evokes the look of hand-forged ironwork while being produced at scale. The texture is most pronounced on the flat faces of square bar stock.

What design styles suit hammered balusters?

Hammered balusters are closely associated with Tuscan, Mediterranean, Italian, and Spanish-influenced design, where the hand-crafted aesthetic is highly valued. They are also popular in Craftsman bungalows, Arts and Crafts interiors, and ranch-style homes. The texture pairs naturally with warm tones, stone surfaces, and exposed wood.

Do hammered balusters require any special installation considerations?

No special process is required. Hammered balusters install the same way as other ornamental iron balusters — cut to length from the bottom, insert into a base shoe and shoe cover or weld to rail. The textured surface holds paint and powder coat very well.

Are hammered balusters available with decorative forged elements such as spheres or knuckles?

Yes. Many hammered bar balusters are available with single or double forged balls (spheres) pressed into the bar, adding focal points along the shaft. These combination hammered-and-forged styles are particularly popular for stair railings where close-up detail is visible.

Hammered Pickets SUI65-632

Be the first to review this product

$12.31

In stock

SKU

SUI65-632

Hammered Picket Bar Size: 1/2 inch Square Bar Hammered 4-Corners

Height: 39 1/2 inches

Ornament Width: 3 1/4 inches

Ornament Height: 12 1/2 inches

47 inch height also available. Call for pricing. 619-423-3703

This picket is a steel square bar with curves in the middle like an "S". It is hammered on the four corners and has two design pieces attached.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

FAQs

Frequently Asked Questions and Answers

Hammered Pickets SUI65-632 SKU: SUI65-632

View all

Details

Hammered Picket Bar Size: 1/2 in. Sq. Bar Hammered 4-Corners Height: 39 1/2 in. Ornament Width: 3 1/4 in. Ornament Height: 12 1/2 in.47 in. height also available. Call for pricing.

More Information

More Information
Unit of Inventory	Each
Weight	0.000000
Is Featured?	No

Hammered Bar & Tubing

Balusters & Pickets

Forged Steel Scrolls and Panels

Ornamental Wrought Iron

Ornamental Cast Aluminum

Hardware & Supplies

Security Screen Doors

Hammered Pickets SUI65-632

Frequently Asked Questions and Answers